top of page

SCULPTURES

 

I am currently working on slip-cast ceramic sculptures. "Slip-cast" refers to a technique wherein a sculpture is generated in clay, a mold is made in plaster, and a liquid clay called slip is poured into the mold, producing a hollow duplicate. This is then fired in a kiln at 1600 degrees F, and then painted with a glaze (pigmented liquid glass) and then fired again. The result is a ceramic piece which will last in any weather until the end of time (it will break if dropped or mis-handled, however). The pieces I am currently producing range from 7" to 15" tall.

 

SKULLS

    

These are a series of ceramic skulls I have made. They are hollow, and most have the eyes and nose cut out. Some have additional cut-outs, and all have a 2" opening on the bottom. They can be candle votives or have candles melted over them. They measure  an average of 6 1/2" tall by 4 1/2" high by 7 1/2" deep.

MONSTERS

      

My ceramic monsters come in two formats: full body and head only. They are also hollow, and for the most part are stand-alone art pieces. They also have a 2" opening in the bottom. They measure between 8 to 12 inches tall, 7 to 15 inches wide, and 7 to 13 inches deep..

"Fish creature" Ceramic Sculpture

Up from the depthe comes this scaly Monster!

This slip-cast ceramic sculpture is produced entirely by Moore Monsters.

It is 12" tall x 8" wide x 10" deep. It is finely detailed and lovingly finished.

This piece is hollow and colored with low-fire

ceramic glaze. It weighs 4 to 5 pounds.

It was produced with a 10 piece mold and has been twice fired at 1600 degrees.

It is completely weather resistent and can be displayed indoors, outdoors or underwater.

This piece is a limited edition collectable of 30 pieces. 

"Space alien" Ceramic Sculpture

    

From the inky blackness of Deep Space comes this terrifying Monster!

This is a slip-cast ceramic sculpture produced entirely by the artist.

It is 1o" tall x 7" wide x 10" deep. It weighs 4 to 5 pounds.

It is finely detailed and lovingly finished.

Thjis piece is hollow and colored with low-fire ceramic glaze.

It was produced using a 10 piece mold and was twice fired at 1600 degrees F.

It is completely weatherproof and can be displayed indoors, outdoors or in a cryo-sleep chamber.

This is a limited run of 30 pieces.

"Gobblum" Ceramic Sculpture

 

He's been hiding in deep caves for years, letting dark powers drive him to madness!

This slip-cast ceramic sculpture was produced entirely at Moore Monsters.

It is 12" tall x 9" wide x 13" deep. It weighs 6 to 7 pounds.

It is finely detailed and lovingly finished.

It is hollow and colored with low-fire glaze. It was produced with an 11 piece mold and was twice fired at 1600 degrees F.

It is completely weather resistant, and can be displayed indoors, outdoors or in a dank, mossy cavern.

This is a limited edition of 30 pieces.

 

 

          

 

      

 

      

"Little Green Man" Ceramic Sculpture

From the Uncharted Worlds beyond our Solar System comes this Bug-Eyed Monster!

This slip-cast ceramic head was produced entirely by Moore Monsters.

It is 8" tall x 8" wide x 6 1/2" deep. It weighs 4 to 5 pounds.

It is finely detailed and lovingly finished.

It is hollow and colored with a low-fire glaze.

This piece was made using a 9 piece mold and was twice fired at 1600 degrees F.

It is weatherproof and can be displayed indoors, outdoors or blazing across the galaxy at warp speed.

This is a limited edition of 30 pieces.

 

 

"Invader" Ceramic Sculpture

From a distant galaxy comes this fearsome Space Monster to destroy and enslave humanity!

This is a slip-cast ceramic sculpture produced by the artist.

It is 9" tall x 15" wide x 8" deep. It weighs 4 to 5 pounds.

This piece has been finely detailed and lovingly finished. It is hollow and was produced with a 9 piece mold and has been assembled after casting.

It has been twice fired at 1600 degrees F and is colored with low-fire glaze.

It is completely weather-proof, and can be displayed indoors, outdoors or in zero gravity.

This design is limited to 30 pieces.

"Odd" Ceramic Sculpture

From a slimy world Beyond Our Dimension comes this hideous Monster.

This is a slip-cast ceramic head which was produced entirely by the artist.

It is 9 1/2" tall x 10" wide x 8" deep. It weighs 5 to 6 pounds.

This monster is finely detailed and finished with care.

It is hollow and colored with low-fire glazes.

It was produced with an 11 piece mold and was twice fired at 1600 degrees F.

It is weatherproof and can be displayed either indoors, outdoors or Beyond the Realm of Sanity.

 

    

Brain Alien

From a Distant Planet light years away comes  Brain Alien!

This is a slip-cast ceramic sculpture producede entirely at Moore Monsters.

It is 9 1/2" tall x 9" wide x 7" deep. It weighs 4 to 5 pounds.

It is  finely detailed and lovingly finished.

It is hollow and colored with low fire glazes.

It was produced with a 9 piece mold and twice fired at 1600 degrees F.

It is completely weatherproof and can be displayed indoors, outdoors or in alien climates.

 

MARTIAN!

Invader from MARS will destroy all that you hold dear!!!

RAPTOR

From the prehistoric past comes this perky little lizard, RAPTOR!

This is a slip-cast ceramic sculpture producede entirely at Moore Monsters.

It is 10" tall x 9" wide x 11" deep. It weighs 4 to 5 pounds.

It is  finely detailed and lovingly finished.

It is hollow and colored with low fire glazes.

It was produced with an 11 piece mold and twice fired at 1600 degrees F.

It is completely weatherproof and can be displayed indoors, outdoors or in Jurassic era climates.

 

bottom of page